Hotpoint MWH2031MW, Руководство по эксплуатации, Страница: 7 / 16

START PROTECTION / CHILD
LOCK
Lock : In standby mode, press Stop button for 3 se -
conds, long beep will signal then Child lock mode will
be activated. The keys will be locked at this mode, di -
splay show current clock or “:”, Child lock symbol on.
This automatic safety function is activated one
minute after the oven has returned to “stand by
mode“. (The oven is in “stand by” when the 24-hour
clock is displayed or if the clock has not been set,
when the display is blank).
The door must be opened and closed e.g. putting
food into it, before the safety lock is released. Else
the display will show “ DOOR “ .
Unlock : In Child lock mode, press Stop button for 3
seconds, long beep will signal then the lock is invalid,
the keys can be used at this moment and Child lock
symbol off.
PAUSE OR STOP COOKING
To pause cooking:
• The cooking can be paused to check, turn or stir
the food by opening the door. The setting will be
maintained for 5 minutes.
To continue cooking:
• Close the door and press the Start button ONCE.
The cooking is resumed from where it was pau -
sed.
• Pressing the Start button TWICE will increase
the time by 30 seconds.
If you don’t want to continue cooking:
• Remove the food, close the door and press the
STOP button.
• A beep will signal once the cooking ends, then it
comes to standby mode.
KITCHEN TIMER
Use this function when you need a kitchen timer to
measure exact time for various purposes such as let -
ting the dough rise before baking etc.
1. Press the Timer button, left-hand digit (minutes)
flicker.
2. Press “+“, ”-” button to set the minutes.
3. Press the Timer button, two right hand digits (se -
conds) flicker.
4. Press “+“, ”-” button to set the seconds.
5. Press the Timer button again, then the timer is
running.
CLOCK
When the appliance is first plugged in or after a power
failure, the display will show “:“ and a beep will signal.
1. Press the Clock button, left-hand digit (hours)
flicker.
2. Press “+“, ”-” button to set the hours.
3. Press the Clock button, two right hand digits (mi -
nutes) flicker.
4. Press “+“, ”-” button to set the minutes.
5. Press the Clock button again.
The clock is set and in operation.
If the clock has not been set after plug in, the clock
will shows “:”.
During the setting of clock , if you press Stop button,
the oven will exit from setting mode and the setting
will be invalid.
MEMORY
The Memory function provides you with an easy way
to quickly recall a preferred setting.
The principle of the Memory function is to store wha -
tever setting that is currently displayed.
How to use a stored setting:
1. Press and keep the Memo button pressed until
an acoustic signal is heard.
2. Press the Start button.
How to store a setting:
1. Select any function.
2. Program your settings.
3. Press and keep the Memo button pressed until
an acoustic signal is heard. The setting is now
stored. You may reprogram the memory as
many times as you wish.
During the cooking procedure, the MW power can be
shown for 3 seconds by pressing the Memo button,
then the oven will return to counting down.
START
This function is used for quick reheating of food with a
high water content such as clear soups, coffee or tea.
1. Press the Start button.
This function automatically starts with maximum mi -
crowave power level and the cooking time set to 30
seconds. Each additional press increases the time
with 30 seconds.
77
en