hotpoint.
co.uk
8
en
GROUNDING INSTALLATION
DANGER
Electrical Shock Hazard
Touching some of the internal
components can cause serious
personal injury or death. Do not
disassemble this appliance.
WARNING
Electrical Shock Hazard
Improper grounding installation
can result in electrical shock.
This appliance must be earthed.
In the event of an electrical
short circuit, this reduces the
risk of electrical shock. This
appliance is supplied with a
moulded three pin mains plug
for your safety and convenience.
The plug must be plugged
into an outlet that is properly
installed and earthed. Consult
a qualified electrician or service
technician if the instructions are
not completely understood or to
ensure the appliance has been
properly earthed. If required, use
a 3-wire extension cord, only.
If an extension cord is used:
1) The marked electrical
rating of the cord should be at
least
as great as the
electrical rating of
the
appliance.
2) The cord should never drape
over the counter-top or
tabletop where it can be pulled
on by children or tripped over
unintentionally.
INSTALLATION
1.Select a level surface that
provides enough open space for
the intake and/or outlet opening
vents.
(1) The minimum installation
height should be not less than
80cm.
(2) The rear surface of
appliance shall be placed
against a wall. Leave a minimum
clearance of 30cm above the
oven; a minimum clearance of
20cm is required between the
oven and any adjacent walls.
(3) Do not remove legs from
the bottom of the oven.
(4) Blocking the intake and/or
outlet openings can damage
the oven.
(5) Place the oven as far
away from radios and TV as
possible. Operation of microwave
oven may cause interference to
your radio or TV reception.
2. Plug your oven into a standard
household outlet. Be sure the
voltage and the frequency is
