background image

GB

7

!

  To  avoid  blocking  the  air  circulation  inside  the  freezer 

compartment, it is advisable not to obstruct the ventilation holes 

with food or containers.

!

 Do not open the door during freezing.

!

 If there is a power cut or malfunction, do not open the freezer 

door. This will help maintain the temperature inside the freezer, 
ensuring that foods are conserved for at least 9 -14 hours.

!

To  maximise  space  inside  the  freezer,  all  drawers  [with  the 

exception  of  the  bottom  drawer]  can  be  removed  from  their 
positions and the food placed directly on the racks/glass shelves 
supplied [where present].

Hidden Shelf

*

There is wireshelf inside the freezer compartment located between 
the upper and lower freezer baskets. To Access wire shelf, remove 
the basket of the upper freezer door. Wire shelf may be removed 
out of the freezer by holding up from the front edge.
It is recommended to use the wire shelf only for long term storage.

ICE DEVICE

*

After pouring water in the special ice cups, place them in their 
places in the ice device. After about 2 hours, the ice cubes will 
be ready. In order to get the ice cubes, it will be sufficient to turn 

the two buttons to the right. The ice cubes will fall in to the tray 

below, ready to be used.

   

If you need more storage space, the ICE DEVICE may be taken out 
by pushing the nail on the top of the ice device.

! To close the refrigerator door to pay attention to the vertical bracket 
position (see figure)

Maintenance and care

Switching the appliance off

During cleaning and maintenance it is necessary to disconnect 
the appliance from the electricity supply:
1.  Press the ON/OFF button to switch off the appliance.
2.  Pull the plug out of the socket.

!

 If this procedure is not followed, the alarm may sound. This alarm 

does  not  indicate  a  malfunction.  To  restore  normal  operation, 
hold  the  ON/OFF  button  down  for  more  than  two  seconds.  To 
disconnect the appliance, follow points 1 and 2 above.

Cleaning the appliance

•   The external and internal parts, as well as the rubber seals may 

be cleaned using a sponge that has been soaked in lukewarm 
water and bicarbonate of soda or neutral soap. Do not use 
solvents, abrasive products, bleach or ammonia.

•   The removable accessories may be soaked in warm water and 

soap or dishwashing liquid. Rinse and dry them carefully.

•   The  back  of  the  appliance  may  collect  dust  which  can  be 

removed by delicately using the hose of a vacuum cleaner set 

on medium power. The appliance must be switched off and 
the plug must be pulled out before cleaning the appliance.

Avoiding mould and unpleasant odours

•   The appliance is manufactured with hygienic materials which 

are odour free. In order to maintain an odour free refrigerator 
and to prevent the formation of stains, food must always be 
covered or sealed properly.

•   If you want to switch the appliance off for an extended period 

of time, clean the inside and leave the doors open.

Replacing the light LED *

Thanks to the powerful light it emits, the new dual LED lighting 
system offers a clear view of all foods, with no shadowy areas.
If  the  LEDs  need  to  be  replaced,  please  contact  the  Technical 
Assistance Service.

Precautions and tips

!

 The appliance was designed and manufactured in compliance 

with international safety standards. The following warnings are 

provided for safety reasons and must be read carefully.

*

 Varies by number and/or position, available only on certain models.

Содержание FFU4DG X MTZ













Отзывы: