Hotpoint E3FX, Инструкция по установке и эксплуатации

Страница: 8 / 12

8
Electrical Connection
Connecting the supply cord to the electrical mains:
The appliance must be connected to a double pole mains
switch which must be installed between the appliance and
the mains. The double pole mains switch must have a
minimum of 3mm of space between the contacts, be sized
to the load and comply with current regulations (the switch
must not be able to disconnect the earth conductor).
The supply cord should conform to BS6004 conductor size
4mm
2
and must be positioned so that no part of it reaches
a temperature of 50°C higher than room temperature.
Before making the connection, make sure that:
•
the limiter switch (fuse) and the residual wiring can support
the appliance load (see the rating plate).
• the mains system is properly earthed in compliance with
current regulations and provisions.
• there is easy access to the socket or the double pole
mains switch after the appliance is installed.
• the isolation switch must not be positioned directly above
the appliance.
Electrical Connection
THIS APPLIANCE MUST BE EARTHED.
The installation procedure must be carried out by a qualified
electrician.
The electrical safety of this appliance is guaranteed only if
the appliance is correctly earthed in compliance with the
standards of electrical safety.
The manufacturer can under no circumstances be considered
responsible for any damage that might occur due to incorrect
earthing of this appliance.
Power supply 230V
Power 2300W