Hotpoint E302X Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 12

Hotpoint E302X Скачать руководство пользователя страница 8

8

Installation

These instructions are intended for the qualified technician
installing the appliance in order to insure that the installation,
adjustments and maintenance procedures are performed
correctly and comply with the regulations currently in effect.
Important: the hob must be disconnected from the
power supply before making any adjustments or
performing any maintenance, etc.

Installing built-in hobs
The hob is a type Y appliance, therefore, the hob can be
installed alongside of cabinets which are higher than the
surface of the worktop. The following precautionary measures
should be observed in order to ensure proper installation:
a) Hoods must be installed in compliance with the required

specifications contained in the instruction manual for the
hood itself.

b) The dimensions and the position of the hole are shown

below:

These measurements must absolutely be observed in
so far as improper installation can cause the surrounding
surface areas to overheat. It is recommended that the
hob be installed at a distance of at least 55 mm from the
back wall or other vertical surfaces to ensure that the air
circulates properly over the cooking area and to avoid
overheating the surrounding surfaces. A seal or gasket
is provided with the hob, make sure that it adheres
properly to the bottom part of the frame of the hob.
The seal must fit properly around the entire hob frame
and especially along the corners in order to create a
seal between the work top and the hob itself so as
to prevent spills or splashes from leaking into the
cabinet below.

The hob must be fixed into the worktop using the fixing clamps
- see diagram.

Very important
It is essential to install the hob on a totally flat surface. Any
damage caused by incorrect fitting may alter the characteristics
or impair performance.
Insert the hob into the hole, pressing firmly around the frame
to make it adhere to the counter top.

Note: If the hob is installed above a built-in oven, it is
preferable that the oven be installed in such a way that it is
set on two strips of wood; if the oven is installed on a
continuous base, there must be an opening in the back of
at least 45 x 560 mm.
The built-in oven must be equipped with a forced air
cooling system.

«
...
6
7
8
9
10
...
»

Содержание E302X













Отзывы:

Нет отзывов