HOW TO
YOUR DRYER
WARNING—To reduce the risk of fire, electric shock, or injury to
persons when using your appliance, read the IMPORTANT SAFETY
INSTRUCTIONS before operating this appliance.
Check
the Lint Filter
-
Clean the lint filter each time the dryer is used. Always be sure the
lint filter is in place. Don’t use the dryer without it. See Care and Cleaning section.
Sort and Load the Clothes
Good sorting for the dryer begins at the washer. Generally, if clothes are
sorted right for washing, they’re sorted right for drying. See the How to
Sort the Clothes section. If you do mix various types of fabrics in your
load, set the controls for the lighter-weight fabrics and remove when dry.
Reset controls for the remaining heavier fabrics.
Set the Controls
See the Controls Setting Guide.
Selections.
Select the proper heat for
your load.
NOTE: FLUFF (NO HEAT)
is to be used only with the
Timed cycles.
Press Guard.
(Operates only with Automatic
cycles).
Turn the Press Guard knob
to YES to help minimize
wrinkle-setting in your
clothes. Press Guard provides
approximately one hour of
no-heat tumbling after the
clothes are dry.
End-of-Cycle Signal.
(Operates with any cycle).
Select this signal, if desired, to
remind you to remove clothes
from the dryer when the cycle
ends. See the End-of-Cycle
Signal section at right.
Cycle Selector.
Turn the cycle selector to
the desired cycle setting.
The selector may be turned
in either direction.
Start Knob.
Turn the Start knob to start the
dryer. (Opening the door
during operation stops the
dryer. To restart, close the door
and
the Start knob.)
6
