Check the Lint Filter
Clean the lint filter each time the dryer is used. Always be sure the lint filter
is in place. Don’t use the dryer without it. See Care and Cleaning section.
Sort and Load the Clothes
Good sorting for the dryer begins at the washer. Generally, if clothes are
sorted correctly for washing, they’re sorted correctly for drying. See the
How to Sort the Clothes section. If you do mix various types of fabrics in
your load, set the controls for the lighter-weight fabrics and remove when
dry. Reset controls for the remaining heavier fabrics.
the
—
Controls and features will vary from model to model
See the
Fabric and Drying Selections guide.
Drying Selections.
Select the proper heat for your load.
Should be used with cycles indicated
●
Automatic
Automatic
Press and
Timed
Regular cycle
Knits Cycles
Cycles
Cottons
High Heat
●
●
Press
Medium Heat
I
I
●
I
●
I
Fluff
No Heat
●
●
●
Low Heat
,
I
*Fluff-No Heat option can be used with an automatic cycle, but for
best performance it is recommended to be used with a timed cycle.
NOTE: Drying times will vary according to the
type of heat used (electric, natural gas or
gas),
size of load, types of fabrics, wetness of clothes,
and condition of exhaust ducts.
Press Guard feature.
Turn the Press Guard cycle indicator to YES and
the Cycle Selector knob to Optional Press Guard.
This feature will minimize wrinkles set in the
clothes. The Press Guard feature provides
approximately one hour of no-heat tumbling
after the clothes are dry.
Use your Signal to remind you to remove clothes.
See Signal section.
Cycle Selector.
Turn the Cycle Selector to the desired cycle setting.
The selector may be turned in either direction.
Signal.
Set this signal, if desired, to remind you to
remove clothes from the dryer when the cycle
ends. See the Signal section.
Start Knob.
Turn the Start knob to start the dryer. (Opening
the door during operation stops the dryer. To
restart,
the door and turn the Start knob.)
7
