6
GB
To access the pre-chamber:
1. using a screwdri-
ver, remove the
cover panel on the
lower front part of
the washing machine
(see figure);
2. unscrew the lid
by rotating it anti-
clockwise (see fi-
gure): a little water
may trickle out. This
is perfectly normal;
3. clean the inside thoroughly;
4. screw the lid back on;
5. reposition the panel, making sure the ho-
oks are securely in place before you push it
onto the appliance.
Checking the water inlet hose
Check the inlet hose at least once a year. If
there are any cracks, it should be replaced
immediately: during the wash cycles, water
pressure is very strong and a cracked hose
could easily split open.
!
Never use second-hand hoses.
Care and maintenance
Cutting off the water and electricity
supplies
•
Turn off the water tap after every wash
cycle. This will limit wear on the hydraulic
system inside the washer dryer and help to
prevent leaks.
•
Unplug the washer dryer when cleaning it
and during all maintenance work.
Cleaning the washer dryer
The outer parts and rubber components of
the appliance can be cleaned using a soft
cloth soaked in lukewarm soapy water. Do
not use solvents or abrasives.
Cleaning the detergent dispenser
drawer
Remove the dispen-
ser by raising it and
pulling it out (see
figure).
Wash it under run-
ning water; this
operation should be
repeated frequently.
Caring for the door and drum of your
appliance
•
Always leave the porthole door ajar in
order to prevent unpleasant odours from
forming.
Cleaning the pump
The washing machine is fitted with a self-
cleaning pump which does not require any
maintenance. Sometimes, small items (such
as coins or buttons) may fall into the pre-
chamber which protects the pump, situated
in its bottom part.
!
Make sure the wash cycle has finished and
unplug the appliance.
1
2
