Hotpoint Aquarius FDW20, Инструкция по установке и эксплуатации

Страница: 9 / 20

D
ISHWASHER
Programme Chart
Select the most suitable programme for the type of dishes and how dirty they are. To select the wash
programme see the chart below:
To optimise wash performance and save on energy, try to use the dishwasher with a full wash load. If it takes some time to fill your
dishwasher, use the pre-wash to avoid caked on food and build up of bad odours.
Select the right
wash cycle for
your dishes.
Selecting the
most suitable
wash cycle for
the load ensures
clean dishes and
a more
economical use of
water and
electricity.
CYCLE CYCLE SELECTION
INSTRUCTIONS
CYCLE
DESCRIPTION
DETERGENT
FOR PRE-
WASH & WASH
RINSE
AID
WASH CYCLE
DURATION
WROHUDQFH
“
in minutes
A)
INTENSIVE
WASH
Very dirty dishes and pans
(NOT to be used for delicate
items)
Pre-wash with hot water at 40°C
Wash at 65°C
2 cold rinses
Hot rinse at 70°C
Drying
5 + 25 g * 120
B)
NORMAL
WASH
Cycle for normally dirty pans and
dishes.
Standard daily cycle. Wash at 55°C
Cold rinse
Hot rinse at 70°C
Drying
30 g
*
88
C)
ECO
WASH Environmentally friendly cycle,
with low energy consumption
levels, suitable for normally dirty
pans and dishes.
2 cold pre-washes
Wash at 45°C
Hot rinse at 65°C
Drying
5 + 25g
*
145
D)
FAST
WASH
Economic and fast cycle to be
used for slightly dirty dishes.
Run cycle immediately after use.
Short wash at 40°C
Hot rinse at 62°C
25g 25
E)
PRE-WASH
Preliminary wash cycle for dishes
while awaiting completion of the
load with the dishes from the next
meal.
Short cold wash to prevent food
from drying onto the dishes.
12
9