EN
7
WASH CYCLE
SELECTOR
knob
Button with
ON/OFF
indicator light
Touch control panel
Button with
ON/OFF
indicator light: press this briefly
to switch the machine on or off. The green indicator light
indicates that the machine is switched on. To switch off
the washer-dryer during the wash cycle, press and hold
the button for approximately 3 seconds; if the button is
pressed briefly or accidentally the machine will not switch
off. If the machine is switched off during a wash cycle, this
wash cycle will be cancelled.
WASH CYCLE SELECTOR
knob: may be turned in
either direction. To select the most suitable wash cycle,
please refer to the
“Table of wash cycles”.
The knob will not move during the wash cycle.
M1-M2
buttons: press and hold one of the buttons to
store a cycle with your own set preferences in the memory
of the machine. To recall a previously-stored cycle, press
the corresponding button.
DRY
button
:
press to decrease or exclude drying; the
selected drying level or time will appear on the display
(see
“How to run a wash cycle or a drying cycle”).
TEMPERATURE
button: press to modify or exclude
the temperature setting; the value selected will appear
on the display above
(see “How to run a wash cycle or a
drying cycle”).
SPIN CYCLE
button: press to modify or exclude the
spin cycle; the value selected will appear on the display
above
(see “How to run a wash cycle or a drying cycle”).
DELAY TIMER
button: press to set a delayed start
for the selected wash cycle; the set delay time will appear
on the display above
(see “How to run a wash cycle or a
drying cycle”).
OPTION
buttons: press to select the available options.
The indicator light corresponding to the selected option will
remain lit
(see “How to run a wash cycle or a drying cycle”).
WASH CYCLE PHASE
icons: these illuminate to indicate
the progress of the wash cycle (Wash
– Rinse –
Spin/Drain – Drying
). The text
lights up when the
cycle is complete.
START/PAUSE
button with indicator light: when the green
indicator light flashes slowly, press the button to start a
wash cycle. Once the cycle has begun the indicator light
will remain lit in a fixed manner. To pause the wash cycle,
press the button again; the indicator light will flash in an
orange colour. If the “Door locked”
indicator light is
switched off, the door may be opened. To start the wash
cycle from the point at which it was interrupted, press the
button again.
DOOR LOCKED
indicator light: indicates that the
porthole door is locked. To open the door, pause the wash
cycle (see “
How to run a wash cycle or a drying cycle
”).
CHILD LOCK
button with indicator light: to activate
or deactivate the control panel lock, press and hold the
button for approximately 2 seconds. when the indicator
light is illuminated, the control panel is locked. This means
it is possible to prevent wash cycles from being modified
accidentally, especially where there are children in the
home.
ECO
indicator light: the
icon lights up when, after
altering the washing parameters, an energy saving of
at least 10% is made. Furthermore, before the machine
enters “Standby” mode, the icon will light up for a few
seconds; when the machine is switched off the estimated
energy saving will be around the 80% mark.
TEMPERATURE
button
OPTION
buttons
SPIN
button
DISPLAY
M1
DRY
ECO
indicator light
START/PAUSE
button
with indicator light
DOOR LOCKED
indicator light
WASH
CYCLE
PHASE
icons
M2
CHILD LOCK
button
with indicator light
DELAY
TIMER
button
7
