22
CLICK TO CLEAN - CLEANING THE GLASS
3.
To correctly reposition the inner glass
, make
sure that the “R” is visible in the right-hand corner
and the clear surface (not printed) is facing up .
First insert the long side of the glass indicated
by “R” into the support seats, then lower it into
position .
Refit the upper edge: A click will indicate correct po-
sitioning . Make sure the seal is secure before refitting
the door .
4.
Refit the upper edge: A click will indicate
correct positioning . Make sure the seal is secure
before refitting the door .
1.
After removing the door and resting it
on a soft surface with the handle downwards,
simultaneously press the two retaining clips and
remove the upper edge of the door by pulling it
towards you .
2.
Lift and firmly hold the inner glass with both
hands, remove it and place it on a soft surface
before cleaning it .
Содержание SA3540HIX
Страница 1: ...Use and Care guide www hotpoint eu register...
Страница 2: ...2 ENGLISH 3...
Страница 26: ...26 Installation guide 90 C x2...
Страница 28: ...28 4 0 0 0 1 0 8 6 4 4 0 1 Printed in Italy 001 x 2...