EN
13
END OF COOKING
An audible signal will sound and the display will
indicate that the function has finished .
Turn the
selection knob
to select a different function
or to position “ ” to switch the oven off .
Please note: If the timer is active, the display will show “END”
alternately with the remaining time.
. SETTING THE TIMER
This option does not interrupt or program cooking
but allows you to use the display as a timer, either
during while a function is active or when the oven is
off .
Keep pressing until the icon and “00:00” start
flashing on the display .
Use or to set the time you require and press
to confirm .
An audible signal will sound once the timer has
finished counting down the selected time .
Please note: To cancel the timer, keep pressing until the
icon starts flashing, then use to reset the time to “00:00”.
.
DIAMOND CLEAN FUNCTION
To activate the “Diamond Clean” cleaning function,
pour 200 ml of drinking water into the bottom of
the oven, then turn the selection knob and the
thermostat knob to the icon .
The function will activate automatically: the display
shows the time remaining to the end, alternating with
“DC” .
Please note: It is only possible to programme the end time
of this function. The duration is automatically set to 35
minutes.
Содержание SA2540HWH
Страница 1: ...Use and Care guide www hotpoint eu register...
Страница 2: ...2 ENGLISH 3...
Страница 26: ...26 Installation guide 90 C x2...
Страница 28: ...28 4 0 0 0 1 0 8 6 4 4 0 1 Printed in Italy 001 x 2...