5
Language
English
Service Manual
Manual LFF 825 IT/HA
Edition
2008.04.01
2.3: GENERAL TECHNICAL DATA
CHAPTER 3: PRODUCT INSTALLATION
Select the installation site for the dishwasher: it can also be installed so that the rear or sides of the
appliance are adjacent to kitchen units or the wall. The dishwasher comes supplied with water inlet and
drain hoses, which can be positioned to the left or right, as required, to facilitate installation.
LEVELLING
Having positioned the dishwasher, loosen or tighten the feet to achieve the desired height and then level
the appliance properly. Make sure the appliance is not off the level by more than 2 degrees. Proper
levelling ensures good appliance operation.
CONNECTION TO THE COLD WATER SUPPLY
Connect the cold water inlet hose. If the water hoses are new or have not been used for a prolonged
period of time, run the water and ensure it is clean and free from impurities before making the
connections.
Failure to take this precautionary measure may result in a blockage and consequently damage to the
dishwasher.
Technical Data
EU
UK
Capacity
12 standard place settings 12 standard place settings
Dimensions
Width
59.5 cm
59.5 cm
Height
82 cm
82 cm
Depth
57 cm
57 cm
Water Connections
Maximum Pressure
10 bar
10 bar
Minimum Pressure
0.5 bar
0.5 bar
Electrical Connections
Voltage
220/230 Volt 50 Hz
220/240 Volt 50 Hz
Minimum Power
1900 Watts
1900 Watts
