20
GB
ICE
trays.
The Easy Ice trays are set into the top part of the freezer
drawers to maximise the space within the freezer. The
trays are drip-free and sealed to prevent food from
tainting the ice cubes.
1. Check that the tray is completely empty and fill it with
water through the opening provided.
2. Take care not to exceed the level indicated (MAX
WATER LEVEL). Excess water prevents the ice cubes
from dispensing (if this happens, wait for the ice to
melt and empty the tray).
3. Turn the tray 90°: due to the connected compartments
each mould fills with water (
see diagram
).
4. Close the opening with the lid provided and put the
tray back.
5. When the ice has formed (minimum time approximately
8 hours) knock the tray against a hard surface and wet
the outside so that the ice cubes come loose and take
them out through the opening.
MAX
W
A
TER LEVEL
MAX
WATER LEVEL
CHILLING CARE:
enables hot dishes contained in
suitable cookware to be cooled quickly inside the freezer
compartment.
!
Use the supplied cookware (this should be stored at
room temperature).
!
After placing the food in the cookware container, close
it using the lid provided and make sure the seal is
airtight.
!
Carefully position the cookware on the rack provided
and place it in the FREEZER and STORAGE
compartment.
There are two operating modes available:
- CHILLING CARE 30
- CHILLING CARE 70
CHILLING CARE 30:
The function lasts thirty minutes
and enables rapid cooling of dishes such as vegetables,
desserts, fish salad and meats weighing less than 500 g
(meat salads).
To select the function, press the MODE button as many
times as is necessary to make the CHILLING CARE
symbol flash, then press the SELECT button to activate
the function.
The status of the function is active when the
corresponding icon on the display flashes.
After 30 minutes a buzzer will sound to indicate that the
function is complete.
To exit this alarm status, press the SELECT button; after
doing so the icon will be displayed in a normal manner.
CHILLING CARE 70:
The function lasts seventy
minutes and enables rapid cooling of dishes such as
meats weighing more than 500 g (short loin steaks,
meatloaf, roast meats).
To select the function, press the MODE button as many
times as is necessary to make the CHILLING CARE
symbol flash, then press and hold the SELECT button for
more than 3 seconds to activate the function.
The status of the function is active when the
corresponding icon on the display is lit in a fixed manner.
After 70 minutes a buzzer will sound to indicate that the
function is complete.
To exit this alarm status, press the SELECT button; after
doing so the icon will be displayed in a normal manner.
!
Once the CHILLING CARE function has been
deactivated, the cookware should be removed from the
freezer compartment and the food may either be
consumed or placed in the refrigerator compartment for
storage purposes.
