Hotone AMPERO II Stomp, Руководство пользователя

Страница: 12 / 102

Unit Mode
Hold footswitch 3 or press button in main display to switch between Patch and Stomp modes.
Patch Mode
•
A “classic” mode friendly for most multi-effects users
•
Recommended to users who are new to Ampero II Stomp or who prefer classic operations
•
In this mode, footswitch function is fixed; one of the footswitch LEDs will be cyan steady to indicate selected patch
•
Use footswitch 1-3 to select between patch 1-3 in the current bank
•
Press footswitch 1+2 to go to previous bank, footswitch 2+3 to go to the next bank
•
In default settings, Ampero II Stomp features Wait Mode when switching banks: in this mode, the unit will stay in the current
patch (footswitch LED will keep flashing) until you choose another by tapping a footswitch
•
To change bank select mode, check Controls section ( ) for details page 33
Stomp Mode
•
Recommended to users who prefer pedalboard-like operations
•
In this mode, footswitch function and LED color depend on your footswitch settings (see CTRL section on ); you can page 24
use the footswitches to toggle effects on/off, tap tempo, etc.
•
Press footswitch 1+2 or 2+3 to activate bank select status: the bank will remain unchanged, so you can choose another patch
in the same bank
•
In bank select status, current patch number/patch name (depending on display mode settings) will be stressed, as shown
below:
•
In bank select status, press one footswitch to choose a patch, press footswitch 1+2 to go to previous bank, footswitch 2+3 to
go to the next bank; the unit will stay in the current patch (footswitch LED will keep flashing) until you choose another patch
by tapping a footswitch
•
Choosing a new patch will deactivate bank select status and footswitch functions will go back to normal
Bypass
In Patch Mode, you can press on a footswitch corresponding to the current patch to bypass the unit (e.g. in P00-2, press
footswitch 2 to bypass the unit):
When the unit is bypassed, press any footswitch to go back to normal.
Ampero II Stomp supports two bypass modes: DSP Bypass and Analog Bypass. You can set unit bypass mode depending on your
needs (see GLOBAL section on
). page 30
Please note:
1. Bypassing the unit will also bypass USB Audio.
2. Ampero II Stomp features a hardware true bypass in Analog Bypass mode, which supports mono in/out, stereo in/out
configuration only (mono in/stereo out not supported).
3. In Analog Bypass mode, the phones output will be MUTED when bypassed.
<
PATCH
MODE
Tools
10
DESIGN INSPIRATION