I/O
Set the global input/output levels and modes in the I/O menu.
Use
INPUT MODE (L)/(R)
to select between input modes for individual input jack:
•
E.GT: Electric guitar or bass
•
GT: Acoustic guitar or other acoustic instrument
•
Line: Keyboard or synthesizer
Defaults are both set to E.GT.
Use
OUTPUT LEVEL
to select between instrument output level (Inst) and line output level (Line) for OUTPUT jacks, default is set
to Line. Use the instrument level for connecting to amplifiers or other effects equipment. Use the line level for connecting to
mixers or audio interfaces.
Use
BYPASS MODE
to select between DSP Bypass and Analog Bypass modes.
Please remember USB audio will also be bypassed when the unit is bypassed.
•
DSP Bypass
Default bypass mode featuring digital buffer bypass switching, great for avoiding signal loss that caused by long signal path
(long patch cables, too many pedals in the chain, etc.). In most situation, DSP Bypass is recommended.
Supports mono in/mono out, mono in/stereo out, stereo in/out configurations. The output jacks and phones jack share the
same output.
•
Analog Bypass
Hardwire true analog bypass mode that keeps your signal path pristine. In this mode, the left input is directly connected to left
output, so as the right I/Os. If you’re facing impedance matching issues (e.g. use Ampero II Stomp before fuzz pedals), or want
to keep a pure analog signal path, this mode is recommended.
Supports only mono in/mono out and stereo in/out configurations. The phones output and effect tail function will be disabled.
GLOBAL
Use the GLOBAL menu to set Ampero II Stomp’s global functions like I/O, USB Audio, Global EQ and MIDI settings. You can also
return to factory settings from this menu.
Global settings will affect unit’s overall working status. These will override any other settings made to your patches. Any
changes made in Global setting will be automatically saved and immediately operational.
In the main menu, press GLOBAL to enter the global settings menu. The screen will look like this:
You can either use the touchscreen or turn the main knob to scroll through the menu targets. As you select your menu target,
buttons will appear in the selection panel.
The selection panel will display the adjustable options of the target you select. These will vary according to the selection. If there
are more than three options in the current selection, use the arrows to the right and left to scroll through the options.
Use quick access knobs 1-3 to adjust the options in the selection panel. If there is no option in the panel above a certain quick
access knob, moving that knob will have no effect.
Customizing Your Ampero II Stomp
Exit the menu
Sub menu
Options panel
30
DESIGN
INSPIRATION
