5
For H-U06C, when the RF indicator is green,
the mic and receiver are paired and ready to
use.
For H-U26C, when the Channel A is connected
to the receiver, the RF indicator is green;
when Channel B microphone is connected,
the RF indicator is blue. When both mics are
connected, it is orange.
RECHARGEABLE MINI RECEIVER
：
①
Power button: Push the button to ON
position to power on the receiver; OFF to
power off the receiver.
Receiver for H-U06C/H-U26C
6
②
Battery status indicator: When the battery is
low, the indicator will become red. When
charging, it is Red and the light will be off when
it is fully charged.
③
USB charging port: Charge the mini receiver
using any 5V1A or 5V2A USB adapter (USB
charging cable included, but USB adapter is not
included)
④
Gain: Gain I volume is slightly higher than
Gain II.
⑤
RF indicator: For H-U06C, when the
microphone and receiver is connected, the RF
indicator is green; for H-U26C, when channel A
microphone is connected with the receiver, it is
green; if channel B is connected, it is When
both are connected, it is green/red.
7
Battery
low
indicator
Red
Green
Charging
status
indicator
Blue
OFF
RF
indicator
H-U06C
H-U26C
①
ON/FF: short press this button to power on /
off the handheld microphone
②
Battery level indicator: This indicator tells you
Handheld Microphone
Battery is low
Charged
In charging
Fully charged
Green
Mic and receiver are paired
Green
Only CHA is connected with
receiver
Red
Only CHB is connected with
receiver
Green/Red Both CHA and CHB are
connected with receiver
ON/FF: short press this button to power on /
off the handheld microphone
Battery level indicator: This indicator tells you
Handheld Microphone
Mic and receiver are paired
Only CHA is connected with
Only CHB is connected with
Both CHA and CHB are
connected with receiver
ON/FF: short press this button to power on /
Battery level indicator: This indicator tells you
8
how much battery is left. Change the battery
when the battery level is low.
③
Frequency point: this shows what frequency
the handheld mic works.
④
Frequency change button: You can find this
button when open the battery compartment.
Short press this button to change the frequency
in case there is interference.
CONNECTION
Make sure your speaker, mixer or PA/amplifier
has 1/4” microphone input and microphone
volume control.
Step 1: Plug the mini receiver into the
1/4”microphoneinput of your audio device like
speaker, mixer and amplifier.
Step 2: Turn the microphone volume to minimum
before plug in the mini receiver to avoid feedback
or harsh loopback.