background image

 

                                          4010 & 4011S/L 

 

Hotchkis Performance LLC. 

 

13 

 

 

 
 

Hotchkis Performance LLC  

Return Policy & Limited Warranty 

 
Effective December 1, 2010 all Hotchkis products must be registered to qualify for warranty at 

the original purchase date. 
 
IMPORTANT:   This warranty supersedes all other warranties included with this product. 
 

Return Policy 

We want you to be completely satisfied with your Hotchkis Performance product.  For products, presenting signs 
of shipping damage please contact the freight carrier immediately.  All  our products are guaranteed to be free 
from manufacturer’s defects.  If your order arrives with a manufacture defect, please contact our Customer 
Service Department at (562) 907-7757.  You will be assigned a Returned Goods Authorization Number (RGA).  
The package you return must show the RGA on the outside of the package, include the original invoice and be 
shipped prepaid to our facility.  The product has to be unused and in its original packaging materials.  Exchanges 
or refunds made after 30 days will be subject to a 20% restocking charge

.  If you purchased your Hotchkis 

Performance product from an authorized dealer, you are still covered by this return policy.  All returns 
however, should be made to your dealer, not to Hotchkis Performance directly. 
 
Limited Warranty 

Hotchkis Performance offers a Limited Warranty against defects in materials and workmanship for the term of 36 
months (3 years) from the date of purchase of this product.  This Warranty only applies to the original retail 
purchaser who retains ownership of the vehicle on which the product was originally installed.  If the product is 
determined to be defective, Hotchkis Performance will repair, replace or refund the purchase price of the defective 
product at Hotchkis Performance's sole discretion, which shall fully satisfy and discharge any and all warranty 
claims.  Any repaired or replaced product will be returned to the sender excluding the cost of freight.  

Products 

Содержание 4010

















Отзывы: