3
MOUNTING
Cabinets are a weatherproof UV protected NEMA 4X cabinet with mounting ears on top and
bottom. The cabinet can be mounted on the side of a control panel, pole or any other surface as
long as the antenna does not have metal running within 12” of the antenna whip. If longer range
is needed, an external long range antenna can be used. Do not mount the HOT SHOT receiver
to the well engine or cover because the strong vibrations can be harmful to the unit.
CODE SWITCH SETTINGS
All transmitters and receivers will be shipped from the factory with preprogrammed field codes. This ensures
that your neighbor will not duplicate the same field code as your unit. Your field codes already match, so you do
not need to program any codes. If you ever need to replace a unit due to servicing, the field code can be pro-
grammed to match the existing or new add on units. FOLLOW THE EXAMPLE BELOW…
FOR CODE QUESTIONS? CALL 785-623-1500
8 9
7
EXAMPLE: CODE 6789
KEY
7
8
9
0
5
6
3
4
6
O
FF
O
N
Use the # KEY to the left
to make each digit of the
code. It takes three of the
switches to make one num-
ber of the code.
Use switches 1,2,3 for the
first # in the code. Switches
4,5,6 for the second #.
Switches 7,8,9 for the third
#. Switches 10,11,12 for the
fourth #.
Transmitter Code
Switches
INDICATOR LEDS
POWER
Signals that the Receiver has power and is ready to receive the code from the Transmitter.
STROBE
Used for troubleshooting, this LED flashes once for each of the four correct digits of the code
received. The LED will stay on steady for one second if an incorrect digit of the code is received.
Example: If the LED flashes two times and then goes on steady it is indicating that the third digit
doesn’t match. If the LED flashes one time and goes on steady it is indicating that the second
digit doesn’t match. If the LED comes on steady right away it is indicating that the first digit
doesn’t match.
RELAY
When this LED is on it indicates that its corresponding relay has been activated.
SUPERVISION
When this LED is flashing it indicates that it has not received its correct code from the
transmitter in the past 3hrs. Sliding function switch #8 to its OFF position will turn off this
indicator LED.
