Host Reliant, Инструкция по эксплуатации

Страница: 10 / 28

10
Upkeep & Clean-up of the Liberator
Checking the Hose for Clogs
Unplug the vacuum hose and check for any buildup of HOST or dirt.
If buildup exists, plug straight end of the vacuum hose into the vacuum connection.
With the vacuum motor on, loosen buildup from hose elbow.
3
4
Cleaning & Rotating Brushes
Clean and rotate brushes each time you clean out the Liberator. The brush bristles
acquire a “set” in the direction they revolve unless switched regularly.
Unplug machine from power.
Remove the Velcro skirt.
Turn lock on brush cover plate
1/4 turn counter-clockwise until
it pops out. Pull up on ring to
remove brush cover plate.
Remove brushes and clean out
underside of machine.
Replace brushes on opposite hex brush shafts.
Liberator brushes can also be switched end-to-
end if desired.
Replace brush side plate. Press brush guard
against brushes while replacing side plate.
If brush plate does not engage, rotate hex shaft
slightly until brush side plate slips in place.
Lock the lock on side plate and replace Velcro skirt.
a d
e
f
g
b
c
Cleaning the Vacuum Shoe & Brush Guard
Remove lint and fuzz from the
vacuum shoe and brush guard.
5
Vacuum shoe
Brush guard
a
b
c