44
Title:
J. Evaporator Fan Shroud Assembly Model: RFH2-SSB(-HD) Refrigerator 1 Section
Index
No.
Description
Material or
Model Number Part Number
Required Number
J-0
to
M-5
N-6
to
S-6
1
Shroud-Evaporator
-
A0846-01
Note:
P
ar
ts are not interchangeab
le
. F
or
ser
ial n
umbers M-5 and ear
lier
, see the
inf
or
mation belo
w
. F
or ser
ial n
umbers N-6
and later
, order the appropr
iate par
ts from
this char
t.
1
Bracket-Fan Motor
-
3A501-01
a
Truss Head Screw
5×1, SS
7C3-051
b
Lock Washer
-
4A0459-01
3
Fan Motor-Evaporator
SHINKO
4A563-01
1
3a
Truss Head Screw
4×40, SS
7C3-0440
4
3b
Split Lock Washer
4, SS
7L-0400
4
3c
Hex Nut
4, SS
7N1-0400
4
4
Blade-Evaporator Fan
-
4A378-01
1
5
Wire Tie (Twist)
-
4A13-01
1
Note for Models Having Serial Number M5 and Earlier
If your model falls into this time frame and you need to replace parts in the assembly,
review the scenarios below and follow the appropriate solution.
a. Unit's evaporator shroud has only two holes or has four holes but only the lower two
holes are threaded.
Solution: Order HS-3541 that contains a motor (Shinko), brackets, blade,
and all fasteners required for mounting to the shroud using the
existing threaded holes.
b. Unit's evaporator shroud has four threaded holes and a Jakel motor.
Solution: Order a new motor (Shinko), brackets, fan blade, and all fasteners
listed in the parts list above. Attach the brackets to the upper two
holes on the shroud.
HS-3541-Shinko Fan Motor Conversion
Index
No.
Description
Material or
Model Number Part Number
Required Number
M-5 and earlier
HS1
Bracket-Fan Motor (L)
-
3A357-01
1
HS1a Truss Head Screw
5×1, SS
7C3-051
1
HS1b Lock Washer
-
4A0459-01
1
HS
Bracket-Fan Motor (R)
-
3A358-01
1
HSa Truss Head Screw
5×1, SS
7C3-051
1
HSb Lock Washer
-
4A0459-01
1
HS3
Fan Motor-Evaporator
Shinko
4A563-01
1
HS3a Truss Head Screw
4×40, SS
7C3-0440
4
HS3b Split Lock Washer
M4, SS
7L-0400
4
HS3c Hex Nut
M4, SS
7N1-0400
4
HS4
Blade-Evaporator Fan
-
4A378-01
4
HS5
Wire Tie (Twist)
-
4A13-01