Hoshizaki KM-81BAJ, Инструкция по эксплуатации

Страница: 24 / 30

B. Cleaning and Sanitizing Instructions
The appliance must be cleaned and sanitized at least once a year. More frequent
cleaning and sanitizing may be required in some water conditions.
WARNING
• To prevent injury to individuals and damage to the appliance, do not use ammonia
type cleaners.
• Carefully follow any instructions provided with the bottles of cleaning and
sanitizing solution.
• Always wear liquid-proof gloves and goggles to prevent the cleaning and
sanitizing solutions from coming into contact with skin or eyes.
NOTICE
To prevent damage to the water pump, do not leave the control switch in the
“WASH” position for extended periods of time when the water tank is empty
.
1. Cleaning Procedure
1) Dilute 5 fl. oz. (148 ml) of recommended cleaner Hoshizaki “Scale Away” with 1 gallon
(3.8 lit.) of water.
2) Remove the air filter. Remove all ice from the evaporator and the ice storage bin.
Note: To remove cubes on the evaporator, move the control switch to the “OFF” position
and move it back to the “ICE” position after 3 minutes. The harvest cycle starts
and the cubes will be removed from the evaporator.
3) Move the control switch to the “OFF” position. Open the door.
4) Disconnect the silicone hose to drain the water. See Fig. 7. Reconnect the silicone hose
back in its correct position after all of the water has drained.
5) Pour the cleaning solution into the water tank. Move the control switch to the “WASH”
position. Close the door.
6) After 30 minutes, move the control switch to the “OFF” position.
7) Disconnect the silicone hose to drain the water. Reconnect the silicone hose back in its
correct position after all of the water has drained.
8) Move the control switch to the “ICE” position to fill the water tank with water.
9) After 3 minutes, move the control switch to the “WASH” position.
10) After 5 minutes, move the control switch to the “OFF” position.
11) Disconnect the silicone hose to drain the water. Reconnect the silicone hose back in its
correct position after all of the water has drained.
12) Repeat steps 8 through 11 three more times to rinse thoroughly.
13) Disconnect the silicone hose and overflow pipe. Next, remove the water tank by
pressing down on the snaps on the brackets (L) and (R) and pulling the tank towards
you slightly and pushing it down. Be careful to avoid breakage when handling the parts.
See Fig. 8.
14) Pull the cube guides (quantity varies depending on model) upward to remove them from
the water tank. They are snapped in place. See Fig. 9.
24