background image

10

HANDLING THE CABINET

1. 

Always move the unit in an upright position. Do not set it on its side 

or upside down as you may damage the cabinet and cause the oil to 

migrate from the compressor.

2.  If lifting the unit, hold it from its base. It is recommended to use a dolly.

3.  Do not let the unit fall abruptly.

4.  Appliance is heavy. Use care when lifting or positioning. Work in pairs 

when needed to prevent injury or damage.

5.  Do not lift using the doors.

LOCATION

Select location

The proper location will ensure peak performance of your appliance. We

recommend a location where the unit will be out of direct sunlight and 

away from heat sources. To ensure your product performs to specifications, 

the recommended installation location temperature range is from 55 to 

115° F (13 to 46°C).

Cabinet clearance

Ventilation is required from the bottom front of the appliance. Keep this 

area open and clear of any obstructions. Adjacent cabinets and counter 

top can be installed around the appliance as long as the front grille 

remains unobstructed. 

Front Grille

Do not obstruct the front grille. The openings within the front grille allow 

air to flow through the condenser heat exchanger. Restrictions to this air 

flow will result in increased energy usage and loss of cooling capacity. 

For this reason it is important this area not be obstructed and the grille 

openings kept clean. It is not recommend the use of a custom made grille 

as air flow may be restricted.

 

 

The base of the refrigerator has heavy duty leveling legs underneath so the cabinet 

may be leveled appropriately and to allow room to clean beneath the cabinet.

Level the cabinet front to back and side to side with a level by using the adjustable 

portion of the leveling legs.

LEVEL THE CABINET

To lower, turn

clockwise

  

  

Leveling leg

To raise, turn 

counterclockwise

Cut the plastic straps.

REMOVE THE CRATE AND SKID

FIG. 2

Содержание HR24C





















Отзывы: