Hoshizaki HNC-120BE-L-BH, Руководство по обслуживанию

Страница: 16 / 38

15
B. Component Service Information
WARNING
• Be sure to move the power switch (earth leakage circuit breaker) to the “OFF” position,
then unplug the showcase before removing or replacing the parts.
• Handle the glass parts with care.
1. Side Cover
Remove the two machine screws at the bottom,
lift up the side cover, and unhook the top.
2. Top Cover
Remove the sliding door and side cover.
1) The top cover is hooked and fixed on the top
frame (aluminum).
2) Lift up and unhook the rear end of the top
cover.
3) When the rear part is lifted off, move it forward
to unhook and remove the front part.
The top cover is tightly hooked on the top frame
and will not come off easily. Remove it with care
to avoid injury. To replace, reverse the removal
procedure.
3. Front Glass
Remove the sliding door, side cover and
top cover. Lift the front glass off the bottom
joint.
The bottom and side interior of the front
glass is sealed with silicone sealant (black).
Be sure to re-seal it with food grade silicone
sealant at replacement.
4. Side Frame
Remove the sliding door, side cover and top
cover. Unbind the wiring on the side frame.
Remove the two screws securing the top
frame and the top of the side frame. Lift the
side frame off the bottom joint.
Top Cover
Top Frame
Fig. 1
Fig. 2
Top Frame
Front Glass