6
WARNING, continued
• Do not put warm or hot foods in the cabinet. Let them cool first, or they will raise
the cabinet temperature and could deteriorate other foods in the cabinet or
overload the appliance.
• All foods in the cabinet should be wrapped in plastic film or stored in sealed
containers. Otherwise foods may dry up, pass their smells onto other foods, cause
frost to develop, result in poor appliance performance, or increase the likelihood of
cross-contamination. Certain dressings and food ingredients, if not stored in sealed
containers, may accelerate corrosion of the evaporator, resulting in failure.
• Do not store items near air outlets in the cabinet. Otherwise, items may freeze up
and crack or break causing a risk of injury or contamination of other food.
• The entire rail must always be covered by rail dividers and pans. Otherwise, the
appliance will not cool properly. Use only pans up to 6" (15 cm) deep.
Do not use
damaged rail dividers or pans.
• Ingredients must be pre-chilled to 37°F (3°C) or less before placing in rail.
• Keep the rail cover closed when not actively preparing food.
• The rail is for keeping ingredients cool while preparing food. If not actively preparing
food for a long period such as overnight, seal pans with plastic wrap in addition
to closing the rail cover. Depending on conditions, the cabinet temperature
setting may need to be adjusted to prevent items from freezing. Alternatively, seal
ingredients and store them in a refrigerator or freezer.
• For CPT46(-D) models, the anti-tip bracket must be properly installed and adjusted.
Otherwise, the unit may tip, resulting in injury or damage.
NOTICE
• Protect the floor when moving the appliance to prevent damage to the floor.
• Keep ventilation openings, in the appliance enclosure or in the built-in structure,
clear of obstruction. The factory-installed rear bumpers must be in place to ensure
proper rear clearance. Blockage of airflow could negatively affect performance and
damage the appliance.
• Do not allow the appliance to bear any outside weight.
• To prevent deformation or cracks, do not spray insecticide onto the plastic parts or
let them come into contact with oil.
• To avoid damage to the gasket, use only the door/drawer handle when opening and
closing.
• Do not leave the doors/drawers open.
• To avoid damage to the top seal, do not lift the appliance by the top section or
remove the top section.
• Do not place anything on top of the rail cover and do not lift the appliance by the
rail cover. The rail cover is not designed to bear any outside weight.
• Do not place anything on the air duct panels beneath the pans in the rail. The air
duct panels are not load-bearing.