5
II. Installation and Operating Instructions
A. Checks Before Installation
* Visually inspect the exterior of the shipping container, and any severe damage noted
should be reported to the carrier.
NOTICE
Remove shipping carton, evaporator spacer, tape and packing material. If packing
material is left in the showcase, it will not work properly.
IMPORTANT
Remove shipping tape holding the door.
* Remove the package containing accessories.
* See the nameplate on the rear of the showcase, and check that your voltage supplied
corresponds with the voltage speci
fi
ed on the nameplate.
B. Location
WARNING
This showcase is not intended for outdoor use.
AVERTISSEMENT
Cette vitrine n’a pas été conçue pour être utilisée à l’extérieur.
IMPORTANT
Normal operating ambient temperature should be within 50°F (10°C) to 80°F (27°C).
Operation of the showcase, for extended periods, outside of this normal temperature
range may affect cooling performance.
For best operating results:
* The showcase should not be located next to ovens, grills or other high heat producing
equipment.
* The location should provide a
fi
rm foundation
for the equipment where its entire bottom
surface can be steadily positioned. Level
the showcase from side to side and front to
rear. Installation of the showcase only partly
in contact with the foundation may result in
deformation, damage or failure.
Fig. 2
No good
Good