Windows Vista Setup Procedure
1. Allow Windows to install the driver before proceeding
2. Go to Start > Control Panel
3. In Classic View, open Sound
4. Click the “Recording” tab
5. Select “USB PnP Sound Device” and click the “Set Default” button*
6. Click the “Playback” tab
7. Select your desired playback option and click the “Set Default” button**
8. If you made any changes, click the “Apply” button
9. Click the “Okay” button
*Note: Instrument signals are strong—keep input level as low as possible to minimize
electronic noise.
**Note: The TRACKLINK Guitar to USB Interface will appear as a playback option as
well as a recording option. It cannot be used for playback, however.
Your
TRACKLINK
Guitar to USB interface is now connected and you are ready to start
tracking. Please consult your software’s instruction manual for additional setup
requirements. For technical support, please visit www.hosatech.com.
Functions and Indicators
•
Solid LED indicates proper connection
•
Flashing LED indicates input is active
Warranty
All
TRACKLINK
products distributed by Hosa Technology, Inc. are warranted to be free
of defects in materials and workmanship for one year. Please visit www.hosatech.com
for limitations.
