Horst Welding HLA SNOW DOUBLESHOT HS200, Руководство оператора

Страница: 17 / 20

Horst Welding Page 1 7
MAINTENANCE
Refer to the General Safety Precautions, in this manual before performing any
maintenance.
1. Always ensure the Broadcast Spreader is properly installed, the prime mover is
positioned on a level surface with the park brake set
2. Shut-off the engine and remove and retain the ignition key
3. Chock the wheels to prevent movement and release residual hydraulic pressure
4. At the beginning of each season, ensure that all fasteners are properly torqued,
all safety guards are in place and that Operator’s Manual is reviewed and
understood
5. At the end of season, perform all maintenance and storage activities, always
check for missing or damaged parts and that all gates function properly; repair
as required
STORAGE
1. Empty all product from hopper prior to removing it from the prime mover
2. Wash thoroughly before putting into storage
3. Inspect for loose, damaged or worn parts. Make needed adjustments, tighten
loose parts and replace damaged and worn parts
4. Store in dry ventilated area properly supported to prevent tipping
5. Store with all hydraulic cylinder piston rod in a retracted position to prevent
corrosion (for units with hydraulic shut off installed)
6. Oiling the Broadcast Spreader before storage will ensure years of trouble free
use
PARTS
Note: For complete and current detailed parts breakdown
please go to hlasnow.com and click on 'Parts'