horsch Transformer 12 VF Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 136

background image

2 | Safety and responsibility

18

60043599 • 02 • 03/2021 • en

Ø

Driving stability may be affected when using auxiliary equipment or, if permit-
ted, driving with filled seed hopper. Ensure sufficient stability of the machine.
Pay attention to the limiting values for the tractor.

Ø

Do not remove any of the prescribed and supplied protective devices.

Ø

Stay clear of the operating range of hydraulically operated parts.

Ø

Do not drive backwards with the machine lowered. The components have only
been designed for forward travel in the field and may be damaged when re-
versing.

2.8.9 Changing equipment / wear items

Ø

Only pulling tools may be attached that meet the technical requirements ac-
cording to these operating instructions. HORSCH does not assume any liability
for damages resulting from the attachment of non-fitting pulling tools as well
as incorrect mounting.

Ø

For machines with valid type approval only pulling tools may be attached that
are covered by the type approval. Attaching pulling tools not covered by the
type approval will void the registration.

Ø

Secure the machine against unintended rolling away!

Ø

Secure raised frame parts under which persons will be present with suitable
supports!

Ø

Caution! Danger of injury caused by projecting parts (e.g. coulters)!

Ø

Assume ergonomic working postures with any assembly work.

Ø

Do not step on rotating parts when climbing onto the machine. They may spin
and create the danger of very serious injuries from falling.

2.8.10 Fertiliser and dressed seed

Inappropriate handling of fertiliser and dressed seed can cause poisoning and death.

Ø

Follow the information given in the safety data sheet of the manufacturer. If
necessary, ask the dealer for the safety data sheet or safety notes.

Ø

Determine and provide the personal protective outfit as specified by the manu-
facturer.

2.8.11 Environmental protection

Operating materials such as hydraulic oil, lubricants, etc. can damage the environ-
ment and the health of persons.

Ø

Do not allow operating materials to drain out into the environment.

Ø

Pick up drained operating materials with absorbent material or sand, fill it into
a leak tight tank and dispose of in accordance with statutory regulations.

2.8.12 Retrofitting and conversions

Structural changes not approved by HORSCH may affect the functionality and opera-
tional safety of the machine and will void any warranty claim.

HORSCH is not liable for damages to life and limb as well as property damages res-
ulting from unapproved retrofitting and conversions.

Ø

Do not perform any structural changes to the pulling tool of the machine.

Ø

Do not make any structural changes or extensions that have not been ap-
proved by HORSCH.

«
...
16
17
18
19
20
...
»

Содержание Transformer 12 VF









































































































































Отзывы:

Нет отзывов

Похожие инструкции для Transformer 12 VF

Бренд: DARKSTAR TECHNOLOGIES Страницы: 4

Бренд: TDW Страницы: 2

Бренд: Taurus Страницы: 25

Бренд: Vancare Страницы: 3

Бренд: Paitec Страницы: 14

Sportsound SSR-300

Бренд: Daktronics Страницы: 42

Бренд: Farmi Forest Corporation Страницы: 32

ActiveFinder One

Бренд: LaserLiner Страницы: 92

9NP-B7524 Series

Бренд: Nautilus Страницы: 2

Be strong NS 700X

Бренд: Nautilus Страницы: 34

Бренд: Nautilus Страницы: 21

Бренд: Yamaha Страницы: 5

QUICK-ALIGN Vari-Flex

Бренд: Össur Страницы: 36

Бренд: Össur Страницы: 2

Бренд: Össur Страницы: 8

Exitronix LEMD Series

Бренд: BARRON Страницы: 6

Бренд: Parker Страницы: 24

Бренд: Astrochefs Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды