Instruction stickers
¾
Clean soiled stickers.
¾
Damaged or illegible stickers must be re-
placed immediately.
¾
Apply the specified stickers to spare parts.
Loading hook
Hook the load suspension gear (chains,
ropes etc.) into this loading hook during
loading.
Loading work only by operators trained by
HORSCH!
Tighten with the appropriate torque
Check the tyre pressure at regular inter-
vals, adapt if necessary - see mainte-
nance overview.
Attach the scales here when calibrating.
With DuoDrill equipment; insert the alumini
-
um clips on the piston rods before folding in.
Min.
50
mm
Maximum tyre pressure 2.6 bar
2.6 bar
4.9 bar
40
41
