horsch Maestro RC Central Fill 1230, Руководство пользователя

Страница: 70 / 108

70 Maestro RC Owner’s Manual – Ver. 2.1 10/2019
www.horsch.com
Metering Unit (Emptying Chute)
1. Housing Door
2. Air Intake Dust Screen
3. Meter Emptying Chute
Emptying the Metering Unit
1. Place the meter emptying shoot under
the housing door.
2. Place a container under the shoot to
catch the seed.
3. Open the housing door and empty the
metering unit.
4. Unscrew the star knobs on the meter and
carefully pull the metering half off.
5. Remove the rest of the seeds with your
hands.
6. Slide the meter housing back together.
Check that the seed tube gasket is in the
right place and hand tighten the star
knobs.
Maintenance / Inspection
Check the metering unit every day for signs of
damage and clean with brushes and
compressed air. Do not use water.
Opening the Metering Unit
The metering unit is assembled with precision
components.
Any disturbance caused by dirt, leaks in the
vacuum system, moisture or wear will have a
negative effect on plating quality.
When performing work on the metering unit,
strict cleanliness and great care in handling any
parts of the equipment is of utmost importance.
Damaged or worn components must be
replaced.
Unscrewing the Housing Half
Loosen both star knobs and carefully remove the
grain feed cover and lay it to the side.
NOTE: For most of the work, the cables and
vacuum hoses may remain connected to the
meter housing.
Metering Unit