horsch Maestro 12.45 CV, Руководство по эксплуатации

Страница: 107 / 155

Rotors
Different cell rotors are available for the various
fertilisers in the form of powder or granulate.
The selection of the individual rotors for vari-
ous applications, working widths and delivery
volumes is described in the "E-Manager" in-
structions.
The cell rotors are arranged according to their
delivery rate per revolution.
NOTE
Ensure absolute leak tightness of components
with all work activities on the metering unit.
Leaks lead to metering errors.
The contact surfaces must be sealed when
installing the metering unit.
The housing must not be warped when bolting it.
Fertiliser metering
unit
The HORSCH metering unit consists of only
a few individual parts and can be dismantled
without tools.
1
2
3
4
5
6
7
Metering unit
1 Housing
2 Drive motor
3 Clearing valve with sealing lip
4 Rotor
5 Side cover with rotor bearing
6 Side cover for pressure hopper with scraper plate
7 Side cover for normal hopper with rape brushes
CAUTION
Risk of crushing on the metering unit
¾
Do not reach into the rotating metering unit.
¾
Do not open the metering unit during ope-
ration.
¾
Whenever performing assembly work on the
motor mount it with the bore facing down to
prevent water from entering the housing.
The bottom of the metering unit is completed by
the fall sluice. In the fall sluice the seed is picked
up by the air flow.
During calibration the seed is taken out of the
metering unit through the opening in the fall
sluice.
The covering must subsequently be closed
again tightly.
MF 103