horsch 420016020001 Скачать руководство пользователя страница 29

Страница: 29 / 84

Omnis FT Owner’s Manual – Ver. 2.0 06/2020

www.horsch.com

SCH

Use Safety Lights and Devices

Prevent collisions between other road users, slow moving tractors with attachments or towed equipment

and self-propelled machine on public roads. Frequently check for traffic from the rear, especially in turns,

and use turn signal lights.

Use headlights, flashing warning lights, and turn signals day and night. Follow local

regulations for equipment lighting and marking. Keep lighting and marking visible and

in good working order. Replace or repair lighting and marking that had been damaged

or lost.

Keep reflective material and Slow-Moving Vehicle signs clean and visible.

Accident Prevention

In addition to the operating instructions, it is important to observe the accident prevention regulations

specified by agricultural trade associations!

Hitching / Unhitching Safety

There is risk of injury to persons when hitching/unhitching the machine to the drawbar of the tractor.

•

Secure the machine against rolling away.

•

Take special care when reversing the tractor. Never stand between the tractor

and machine. THIS IS A CRUSH ZONE!

•

Only park the machine on a firm and level surface.

•

Always lower the front hitch jack before unhitching the machine, then unfold

the wings and lower it to the ground.

Changing Implements

•

Secure the machine against unintended rolling!

• Secure lifted frame parts, under which you will be working, with suitable supports!

• Caution! Danger of injury caused by protruding parts (tines, discs)!

• Do not use the packer or other rotating parts when climbing onto the machine. These could start to

rotate, and you could fall and be seriously injured.

In Operation

•

Check the area around the machine (for children!) before setting off and starting operation of the

machine. Ensure sufficient visibility!

• Stay clear of the operating range of hydraulically operated parts.

• Passengers are not allowed to ride on the machine during operation!

Содержание 420016020001





















































































Результаты поиска

Содержание 420016020001

Отзывы:

Похожие инструкции для 420016020001

Бренды по названию

Популярные бренды

horsch 420016020001, Руководство пользователя

Результаты поиска

Содержание 420016020001

Отзывы:

Похожие инструкции для 420016020001

Бренды по названию

Популярные бренды