STFX 3,5x15
K6S M4x10
Systemskruv
6,2x13
Stop angel
Locking angel
Locking pi
Stop angel
MONTERINGSBESKRIVNING
M439-3
SIGLO
SLIDING TABLE TOP
5
6
STFX 4,0x20 2pcs.
Used between controller and table top.
STFX 3,5x15 6pcs.
Used between stop angels and table top
and between locking angel and table top.
F6S M4x10 4pcs.
Used between expanders and fastening plate.
STFX 4,0x20
Place tabletop with the upside down. N.B! place something under the
tabletop to protect the surface
.
Attach the controller with the STFX 4,0x20 screw, place cable in groove.
Attach rubber pieces to the stop angles and screw them to the table with the STFX 3,5x15 screws.
Attach the fastening plates with the 6,2x13 screws.
Attach expanders with the F6S M4x10. The hole at the back hooks to the pinon the fastening plate
.
Apply the plastic heel.
*Screw the locking pin to the locking angel and then screw locking angel to table top.
K6S M4x10 2pcs.
Used between locking pin and locking angel.
F6S M4x10.
Systemskruv 6,2x13 pcs.
Used between fastening plate and
table top.
*Only if the table is lockable. Lock is ordered seperately.
Place tabletop on the stand. Place the metal plate over the lowered holes of the expanders.
Attach the expanders to the top with the P6S M6x12 screws.
P6S M6x12 6st.
Used between expanders and stand.
Metal plate 8,4X16X1,5 6pcs
.
Place between P6SMx12 and expanders.
20170405
