Horotec VIBRATO MSA 19.709, Руководство по эксплуатации

Страница: 12 / 25

12
Here you can see the individual tanks B1 to B6 and right aside the associated name or the default name
(substance A-­‐F). These can be replaced while changing the tanks by your own names. It is advisable to enter
the name of the fluid used during the cleaning.
The bath position identifies the position of the individual tank on the turntable and starts with the
ultrasonic bath B1 (counter-­‐clockwise). This allows the identification of the tank and its position on the
turntable, which cannot be changed.
On the right side, you see a consumption bar showing the status of the used bath, if a maximum duration
has been determinate.
Turn the ENC until the desired position, where should be placed the tank. Confirm the selection by pressing
the ENC. Here the overview in detail of the bath.