background image

25

©   2 0 0 4   d i r e c t e d   e l e c t r o n i c s ,   i n c .

triggered response description

A Triggered Response can be activated by any of the triggers listed

below and consists of an alarm page along with the response

described for each trigger. The default Triggered Response dura-

tion is 30 seconds but can be programmed from 1-180 seconds

by your installer with the Directed Bitwriter

®

.

SSeen

nssoorr  T

Trriiggggeerr - Heavy impacts to the vehicle will instantly

sound the siren and flash the lights for the programmed

duration and report Zone 2.

D

Doooorr  T

Trriiggggeerr - If a door is opened the siren will chirp for three

seconds, then the siren will sound and the lights will flash for

the programmed duration and report Zone 3. The three

seconds allow the user time to disarm the system with a

minimum of noise should a door be opened inadvertently

while the system is armed.

H

Hooood

d  T

Trriiggggeerr - Opening the hood will sound the siren, flash

the lights for the programmed duration, and report Zone 1.

T

Trru

un

nkk   T

Trriiggggeerr - Opening the trunk (if connected) will

instantly sound the siren and flash the lights for the
programmed duration and report Zone 4.

IIggn

niittiioon

n   T

Trriiggggeerr - If the ignition is turned on the siren will

chirp for three seconds, then the siren will sound and the lights
will flash for the programmed duration and report Zone 5.

When a Triggered Response is activated the transceiver will:

Repeat four quick beeps (or vibrate) for 15 seconds. 

The full trigger alert icon (28) will turn on for 15 seconds.

Содержание 564T


























































Отзывы: