background image

Page

 

iv

  

 

 

 

 

 

 

RS

232/485

 

RF

 

Modem

 

Product

 

Manual

 

 

MAN0782

02

 

 

 

LIMITED WARRANTY AND LIMITATION OF LIABILITY 

 

Horner APG,LLC. ("HE-APG") warrants to the original purchaser that the WCM910

 module

 manufactured by HE-APG is free 

from defects in material and workmanship under normal use and service.  The obligation of HE-APG under this warranty shall 
be limited to the repair or exchange of any part or parts which may prove defective under normal use and service within two 
(2) years from the date of manufacture or eighteen (18) months from the date of installation by the original purchaser 
whichever occurs first, such defect to be disclosed to the satisfaction of HE-APG after examination by HE-APG of the allegedly 
defective part or parts.  THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR 
IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE AND OF ALL OTHER 
OBLIGATIONS OR LIABILITIES AND HE-APG NEITHER ASSUMES, NOR AUTHORIZES ANY OTHER PERSON TO 
ASSUME FOR HE-APG, ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THIS WCM910 

module

.  THIS 

WARRANTY SHALL NOT APPLY TO THIS WCM910 

module

 OR ANY PART THEREOF WHICH HAS BEEN SUBJECT TO 

ACCIDENT, NEGLIGENCE, ALTERATION, ABUSE, OR MISUSE.  HE-APG MAKES NO WARRANTY WHATSOEVER IN 
RESPECT TO ACCESSORIES OR PARTS NOT SUPPLIED BY HE-APG.  THE TERM "ORIGINAL PURCHASER", AS USED 
IN THIS WARRANTY, SHALL BE DEEMED TO MEAN THAT PERSON FOR WHOM THE WCM910

 module

 IS ORIGINALLY 

INSTALLED.  THIS WARRANTY SHALL APPLY ONLY WITHIN THE BOUNDARIES OF THE CONTINENTAL UNITED 
STATES. 

 
In no event, whether as a result of breach of contract, warranty, tort (including negligence) or otherwise, shall HE-
APG or its suppliers be liable of any special, consequential, incidental or penal damages including, but not limited 
to, loss of profit or revenues, loss of use of the products or any associated equipment, damage to associated 
equipment, cost of capital, cost of substitute products, facilities, services or replacement power, down time costs, 
or claims of original purchaser's customers for such damages. 
 

To obtain warranty service, return the product to your distributor with a description of the problem, proof of 
purchase, post paid, insured and in a suitable package. 

 
 

ABOUT PROGRAMMING EXAMPLES 

 
Any example programs and program segments in this manual or provided on accompanying diskettes are included 
solely for illustrative purposes.  Due to the many variables and requirements associated with any particular 
installation, Horner APG cannot assume responsibility or liability for actual use based on the examples and 
diagrams.  It is the sole responsibility of the system designer utilizing the WCM910 module to appropriately design 
the end system, to appropriately integrate the WCM910 module and to make safety provisions for the end 
equipment as is usual and customary in industrial applications as defined in any codes or standards which apply. 
 

Note:  The programming examples shown in this manual are for illustrative  

purposes only.  Proper machine operation is the sole responsibility of the  
system integrator. 

 
 
 
 
 
 
 
 

Содержание HE200WCM910

























































Отзывы: