LMAN0070-01-EN
Hazardous Location Series
07/29/20
Page 2
GENERAL WIRING DIAGRAM
•
CAUTION:
Turn off electrical power at fuse
or circuit breaker box before wiring fixture
to the power supply.
Connec�ng panels to AC source supply:
All units must be individually connected
to the AC supply.
Black = Line
White = Neutral
Green = Ground
INSTALLATION & OPERATION
Electrical Connec�on:
1. Loosen the three M5 socket head cap screws with spring washers of Tank Cover with torque value 5 N-m.
2. The thread of entry hole of Tank is 3/4” NPT. A�ach the Tank to suitable conduit.
3. Inset the wire from outside through the conduit and the entry hole of Tank, then connect to Terminal Block.
4. Introduce the wires of branch circuit as following:
Black wiring connects to Line
White wiring connects to Neutral
Green wiring connects to Ground
5. Re-a�ach the Tank Cover and �ghten it by three M5 socket head cap
screws with spring washers with torque value 5 N-m.
6. Check the �ghtness of conduit and Tank Cover.
Type of Installa�on
standard
op�onal
LED Driver
BLACK (LINE)
GREEN (GROUND)
WHITE (NEUTRAL)
AC INPUT
( - ) ( + )
LEAN WIRES
TO LED LOAD
Terminal
Block
