LMAN0032-01-EN
ETG-WLL INSTALL SHEET
10/12/2015
No part of this publica
�
on may be reproduced without the prior agreement and wri
�
en permission of Horner Ligh
�
ng Group, LLC. Informa
�
on in this document is subject to change without no
�
ce.
Page 3
5) Using a leveling tool, adjust the cable length at the Locking Mechanism to level the fixture
horizontally.
3.2 Reflectors
1) Obtain pair of reflectors for each tube.
2) Slide flat edge of reflector into slot on the light housing (heat sink) with reflective side facing
down.
3) Gently slide outside edge down so that the reflector tab going into the fixture becomes flush
against the housing.
