RAMBO INSTRUCTION BOOKLET
22
Problem
Diagnosis
Solution
General
Handpiece not
cutting
correctly
Comb and cutter not
set-up correctly in
handpiece.
Refer to set-up pages 4 - 6
Comb and cutter
incorrectly sharpened and/
or blunt.
Have combs and cutters
professionally sharpened.
Not enough tension on
comb and cutter.
Re-set tension, see page 6.
No rise in sheep’s wool.
Leave sheep longer or
select different style of
comb.
Cutter not
staying in
position
Conical pins may be worn
on fork body.
Replace forks. This is best
done in pairs.
Comb not
staying in
position
Comb screws are worn or
not tightened properly.
Replace comb screws.
Forks falling out
of fork body
Fork retaining spring may
be broken.
Replace fork retaining
spring.
Handpiece not
tensioning/
comb and
cutter losing
tension
Tension pin and sliding
sleeve worn.
Replace tension pin and
sliding sleeve.
Tension pin cup worn.
Replace tension pin cup.
Tension lock ring damaged,
worn or stuck.
Replace tension lock ring.
Handpiece
vibrating
excessively
Cup and post worn.
Have cup and post
replaced and set by a
trained technician.
Fulcrum post loose.
Fork body
broken
Handpiece accidentally
damaged.
Send handpiece for repair
and full service.
Any repairs should only be carried out by a trained
professional. Only genuine parts designed for this machine
should be used.
TROUBLESHOOTING
