Sheep Shearer
and cattle clipper
INSTRUCTIONS
www.HornerShearing.com
Страница 1: ...Sheep Shearer and cattle clipper INSTRUCTIONS www HornerShearing com ...
Страница 2: ...on Adjustment before Shearing While the machine is still switched off ensure that the conical pins on the chicken feet sit exactly into the positioning holes in the cutter Tighten the tension nut until resistance is felt illustration 1 Do not over tighten If it is not cutting properly at the start of shearing you can add a little more tension Do not slacken off tension while the machine is running...
Страница 3: ...e the cutter must not overhang the hollows on the ends of the comb teeth Tighten the combs screws Tighten the tension nut until the cutter is pressed against the comb and you can feel a slight resistance Add more tension if it does not cut cleanly on the first blow Always check that neither of the conical pins has moved out of the holes in the cutter Changing Combs and Cutters Replace both comb an...
Страница 4: ...very hot soapy water Brush to remove all grease dirt and oil Rinse in hot water and dry immediately Keep in a dry place To Post Wrap the clean dry combs and cutters together securely covering all sharp points and preventing any movement Put in a Jiffy bag or box Include your name address and phone number Ask for a Certificate of Posting at the Post Office it is free Note Combs and cutters cannot b...
