3
2
DCC Ready
Fig.2
Fig.1
Lubrication
IMPORTANT – Only apply small single drops of light machine oil to the places indicated in red in Fig.2. This is best achieved by making a simple oil “dropper”
as illustrated in Fig.1. Insert a straightened paper clip into a cork and use a bottle cap as a container for the oil. A small drop of oil can then be picked up by
the dropper and applied in exactly the right place. Immediately wipe off any excess oil, especially from the locomotive body. Only lubricate moving parts.
Footsteps
Fit footsteps to both sides as shown (the wide steps to be fitted to DMBS bogie beneath GUARD end).
Body Removal
Unclip body from along sides and ease off by lifting upwards while gently pulling the chassis down.
(When replacing the body, make sure that it is clipped securely back into place).
DMBS
TS
DMC
guard
1
2
4
3
