4. Engine start procedures
You have two engines on your vessel, one to operate the starboard prop and
one for port. You must switch on both engines to maneuver the vessel. Start
one engine and then start the other.
•
Make sure engines are in neutral.
•
Turn the key to “start” to switch on the ignition (an audible alarm should
sound).
•
Turn the key further to the right to “start” and release once the engine
has started.
•
Once the engines are running check you have water coming out of the
exhausts which are located at the transom of the vessel.
•
To stop the engines press the stop buttons until the engines stop. Turn
the keys back to “off”.
Should you hear an engine alarm during operation, check which light
is on and immediately shut down the engine-
CALL HORIZON
All our yacht engines run with diesel fuel. There is a diesel filler cap
on the transom which is clearly marked “DIESEL”….
DO NOT PUT
WATER IN HERE.
