9
Exit Programming Mode:
There are three ways to exit programming mode.
1. Select the last option in programming; When the motor emits
two tones, move the throttle stick down within three seconds.
2. After setting the value for a programmable item, move the
stick to the bottom within 2 seconds after selecting the value.
3. After setting a value, unplug the battery. The new settings
will be saved.
Sub-Menu Within Each Programmable Item:
Set the value by moving throttle stick to the top position when
you hear the tones that indicate the value you want. A tone will
indicate the value is set and saved.
IMPORTANT:
If you do not make a selection, leaving the throttle
at high will now keep the throttle stick at the top position, you
will go back to the programming menu and you can select other
items to program. However, if you move the stick to the bottom
position within 2 seconds, you will exit the program mode.
Feature
One Short
Tone
Two Short
Tones
Three Short
Tones
1. Brake
Off
On
2. Battery Type
LiPo/LiIon
NiMH/NiCd
3. Low Voltage
Cutoff Reaction Soft Cut-Off
Hard Cut-
Off
4. Low Voltage
Cutoff
Low
Medium
High
5. Start Mode
Normal
Soft
Super Soft
6. Timing
Low
Medium
High
