EN
8
Pitts S-1S
SAFE
®
Select technology can be easily assigned to any open switch (2 or 3
position) on your transmitter. With this new feature, you now have the flexibility
to enable or disable the technology while in flight.
IMPORTANT:
Before assigning your desired switch, ensure that the travel for
that channel is set at 100% in both directions.
Assigning a switch
1. Bind the aircraft correctly to activate SAFE Select. This will allow the
system to be assigned to a switch.
2. Hold both transmitter sticks to the inside bottom corners and toggle the
desired switch 5 times (1 toggle = full up and down) to assign that switch.
The control surfaces of the aircraft will move, indicating the switch has
been selected.
Repeat the process to assign a different switch if desired.
NOTICE:
SAFE Select is assignable on any unused Channels 5–9.
100%
100%
3 position Switch
2 position Switch
SAFE
®
Select Switch Designation
Mode 1 and 2 Transmitters
x 5
The table to the right shows the factory settings for the control horns and servo
arms. Fly the aircraft at factory settings before making changes.
NOTICE:
If control throws are changed from the factory settings, the AR631
gain values may need to be adjusted. Refer to the Spektrum AR631 manual
for adjustment of gain values.
After flying, you may choose to adjust the linkage positions for the desired
control response. See the table to the right.
Control Horn and Servo Arm Settings
Horns
Arms
Elevator
Ailerons
Rudder
