Horizon Hobby E-FLITE F-14 Tomcat Twin 40mm EDF Скачать руководство пользователя страница 18

EN

F-14 Tomcat Twin 40mm EDF

18

Contains FCC ID: BRWWACO1T

This equipment complies with FCC and IC radiation exposure limits set forth for 

an uncontrolled environment. This equipment should be installed and operated 

with minimum distance 20cm between the radiator and/or antenna and your body 

(excluding fingers, hands, wrists, ankles and feet). This transmitter must not be co-

located or operating in conjunction with any other antenna or transmitter.

Supplier’s Declaration of Conformity

F-14 Tomcat Twin 40mm EDF (EFL01450)

This device complies with part 15 of the FCC Rules. Operation is subject to 

the following two conditions: (1) This device may not cause harmful 

interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation.

 CAUTION:

 Changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the 

equipment.

NOTE:

 This equipment has been tested and found to comply with the limits for 

a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is 

no guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

Horizon Hobby, LLC 

2904 Research Rd.,

Champaign, IL 61822

Email: [email protected]

Web: HorizonHobby.com

FCC Information

IC Information

Contains IC: 6157A-WACO1T

CAN ICES-3 (B)/NMB-3(B) 

This device contains license-exempt transmitter(s)/receivers(s) that comply with 

Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).  

Operation is subject to the following 2 conditions: 

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause 

undesired operation of the device.

Compliance Information for the European Union

EU Compliance Statement: F-14 Tomcat Twin 40mm EDF (EFL01450)

 

Hereby, Horizon Hobby, LLC declares that the device is in compliance 
with the following: EU Radio Equipment Directive 2014/53/EU; RoHS 2 

Directive 2011/65/EU; RoHS 3 Directive - Amending 2011/65/EU Annex II 2015/863.
The full text of the EU declaration of conformity is available at the following internet 
address: https://www.horizonhobby.com/content/support-render-compliance.

F-14 Tomcat Twin 40mm EDF (EFL01450) Wireless Frequency Range and 
Wireless Output Power:

 2404-2476 MHz / 1.43 dBm

 

EU Manufacturer of Record:

Horizon Hobby, LLC
2904 Research Road
Champaign, IL 61822 USA

EU Importer of Record: 

Horizon Hobby, GmbH
Hanskampring 9
22885 Barsbüttel Germany

WEEE NOTICE:

This appliance is labeled in accordance with European Directive 
2012/19/EU concerning waste of electrical and electronic equipment 
(WEEE). This label indicates that this product should not be disposed of 
with household waste. It should be deposited at an appropriate facility 
to enable recovery and recycling.

Содержание E-FLITE F-14 Tomcat Twin 40mm EDF




















Отзывы: