EN
Night Radian
6
The LED controller (
A
) offers the ability to change the light pattern and speed as
well as turn the lights on and off with the attached on/off switch (
B
).
1. Button 1 moves backward in the LED pattern list.
2. Button 2 cycles through the 7 speed settings
3. Button 3 moves forward in the LED pattern list.
4. Turn lights on or off with the attached On/Off switch.
1 2 3
B
A
LED Controller
PNP Receiver Selection and Installation
The Spektrum AR631 receiver is recommended for ths airplane. If you choose
to install another receiver, ensure that it is at least a 6-channel full range (sport)
receiver. Refer to your receiver manual for correct installation and operation
instructions.
Installation
1. Remove the canopy from the fuselage.
2. Mount the receiver parallel to the length of the fuselage. Use double-sided
servo tape.
3. Attach the appropriate control surfaces to the their respective ports on the
receiver using the chart in the illustration.
CAUTION:
Incorrect installation of the receiver could cause a crash.
AR631 Port Assignments
BND/PRG = BIND
1 = Throttle
2 = Rudder
3 = Elevator
4 = NA
5 = Lights
6 = NA
