EN
7
Center of Gravity (CG)
The CG location is within 154-168mm,
measured from the bottom corner of the
front of the FPV camera mount as shown in
the illustration.
CAUTION:
The main motor
nacelles must be in the upright,
multirotor fl ight position when checking
the center of gravity. Failure to do so will
give an incorrect center of gravity and
may cause a crash. Crash damage is not
covered under warranty.
Flight Control Direction Test
This test ensures that the fl ight control system is functioning properly.
Assemble the aircraft and bind your transmitter to the receiver before
performing this test.
CAUTION:
Keep all body parts, hair and loose clothing away from a
moving propeller, as these items could become entangled.
Set the transmitter switches to airplane fl ight, stability mode. Move the entire
aircraft as shown in the table and ensure the control surfaces move in the
direction indicated. If the control surfaces do not respond as shown, do not fl y
the aircraft. Contact Horizon Product Support.
Once the fl ight control system is active, control surfaces may move rapidly.
This is normal.
Aircraft Movement
Elevon Reaction
154-168mm
