__________________________________________________________________________________
VERT Series Owner’s Manual
4
Identification:
For future reference, write down the model, serial number, date of purchase and use this
information whenever corresponding concerning your dehumidifier.
Model Number
VERT ______________________
Serial Number
_____________________________
Date of Purchase _____________________________
Customer Service:
For additional questions concerning the operation of your dehumidifier, please:
Contact your installing contractor
Please call ACE at 919-258-3330
Email:
Warning
120 Volts AC may cause serious injury from electric shock.
1.
Disconnect electrical power before servicing
2.
Plug unit only into grounded electrical outlet
3.
Do not use extension cord
4.
Do not use plug adapter
Power Supply:
115V, 60 Hz
AC Only 1 Phase
Outlet Requirement:
3-Prong, GFI
Circuit Protector:
15 Amp Time Delay Fuse or Circuit Breaker
Principle of Operation
The VERT Series Dehumidifier utilizes its integral humidistat or optional remote mount
humidistat to monitor the conditioned space. When the relative humidity goes above the
selected set point, the dehumidifier will energize. Air is drawn across an evaporator coil.
The evaporator coil is cooler than the dew point of the air so moisture will condense out of
the air. A heat exchanger located between the evaporator and condenser coils helps improve
the efficiency of the unit. Air is then reheated through the condenser coil and distributed
back into the room. There is a fan switch next to the humidity to control operation of the
unit’s fan. In “ON” mode, the fan runs constantly. In the “AUTO” mode, the fan only runs
when the unit’s humidistat has turned the dehumidifier “ON”.
