Horizon Fitness PAGO 3, Руководство пользователя, Страница: 6 / 19

10 11
ASSEMBLY STEP 2
A Open HARDWARE FOR STEP 2 .
B Unfold the wire harness located in the frame bracket.
Wrap the end of the wire tie, located at the bottom of
the console mast, around the end of the wire harness.
Pull the wire tie and wire harness up through the
console mast while simultaneously sliding the mast
over the frame bracket.
C Attach the
CONSOLE MAST
using 4
BOLTS (C)
, 4
SPRING WASHERS (D) and 4 ARC WASHERS (E) .
HARDwARE fOR STEP 2 :
PAGO 3
PAGO 4
BOLT (C)
M8x1.25Px15L
Qty: 4 SPRING WASHER (D)
Φ 8.2x Φ 15.4x2.0T
Qty: 4
ARC WASHER (E)
Φ 8.4x Φ 17.0x1.0T
Qty: 4
ASSEMBLY STEP 3
A Slide the heart rate wires of the handlebar through
the hole in the handlebar bracket on the
CONSOLE
MAST .
B Attach the HANDLEBAR to the CONSOLE MAST
using 4
PRE-INSTALLED SCREWS
.
PAGO 3
PAGO 4
NOTE: Be careful not to pinch any wires while attaching
the console
mast.
NOTE: Be careful not to pinch any wires while attaching
the handlebar.
BOLT(C)
SPRING WASHER(D)
ARC WASHER(E)
MAIN FRAME
CONSOLE MAST
PRE-INSTALLED SCREW
CONSOLE MAST